Cablofil Wire Mesh Cable Tray

Details

Products:Wire Mesh Cable Tray ( China Products Manufacturer and Factory Wholesale Suppliers)

Wire Mesh Cable trays and wire mesh cable baskets provide a safe open solution for routing cables and wires. Its wire-frame

composition allows air to circulate for proper cable ventilation to provide a track that allows cables and wires 

to be routed around a building in an easily maintainable

Applications:Cable Support

Manage cables with an open overhead system that's tested to handle heavy loads, easy to install on the job  

site and a more flexible option than traditional conduit systems. Tested at every stage of the process, 

Wire Mesh Cable Tray has performed in a wide variety of applications: heavy power cable pathways on oil 

drilling platforms, below floors in modern office buildings and above ceilings in electrical and data installations.

The zinc plating on these tray systems offers good corrosion resistance. Cut, bend, and connect the wire mesh 

trays to route cable and hose in configurations such as curves, slopes, and tees. They are a lightweight option

for organizing bundles of cable and hose while keeping them accessible.

Use bolt cutters to cut trays to the size you need. The maximum capacity is based on mounting brackets spaced 

every 6 feet.

Straight connectors join two trays in a straight line.

Clamp connectors can be used to join two trays after you have bent them. You can also use these connectors to

join trays in a straight line.

Drop outs relieve stress on the cable and hose as it exits the tray. Plastic drop outs can be attached to trays 

without bending or removing any wires.

KOKA wire mesh basket is ideal for commercial and data center cable management, providing a flexible means of 

adapting your tray to fit your job-site application.

Easily modified for both horizontal and vertical transitions

Available in a variety of finishes to meet environmental and aesthetic requirements

Cable trays and baskets provide a safe open solution for routing cables and wires. Its wire-frame composition 

allows air to circulate for proper cable ventilation to provide a track that allows cables and wires to be routed

around a building in an easily maintainable

Featrue

Wire mesh cable tray supplies a point-to-point pathway for cables. Made of high quality steel wire and welded 

into 2" × 4" rectangular grid pattern. the grid is formed into U shaped channels, which supports and carry cables. 

The hole pattern design make it possible for the cables to pass through and go up and down.

Compared with fiberglass cable trays, the wire mesh cable tray has higher tensile strength and mechanical strength. 

The material of wire mesh cable trays are various, including carbon steel with various surface furnish and stainless 

steel. Different surface finish can suit different applications.

Specification